User Manual
Table Of Contents
- Copyright
- Disclaimer
- BenQ ecoFACTS
- Introduction
- Installation
- Environment check
- Assembling the InstaShow Host
- Setting up the InstaShow Host
- Positioning the InstaShow Host antennas
- Connecting the HDMI cable and power
- Setting up and powering an InstaShow Button
- Pairing a InstaShow Button and InstaShow Host
- Waking up the InstaShow Host
- Storing InstaShow Buttons in the cradle
- Resetting a InstaShow Host
- Resetting a InstaShow Button
- Starting and stopping presentations
- Web management
- Troubleshooting
12 Installation
1. Attach the InstaShow Host to the ceiling mount using the provided velcro strap.
2. Fix the InstaShow Host to the mounting holder.
3. Use the supplied velcro to fix the mounting holder and the InstaShow Host to the ceiling mount
as shown in the illustration.
Placing the InstaShow Host on a table
If your display is placed on a table, first attach the lid of to the InstaShow Host in the following the
process described below:
1. Align the top of the lid over the bottom of InstaShow Host so that the alignment hole is pointed
towards the “Open” text located at the front side of the InstaShow Host, then push the lid into
the InstaShow Host.
2. Follow the “Lock” arrow displayed on the lid and turn the lid counter-clockwise.
• Please only use the velcro strap (240(L)mm*25(W)mm) provided with the kit to mount the InstaShow Host to
a ceiling mount.
• Please see Positioning the InstaShow Host antennas on page 15 for guidelines on positioning the antenna to
maximize signal reception.
OPEN
LOCK
OPEN
LOCK