User Manual
Table Of Contents
- Copyright
- Disclaimer
- BenQ ecoFACTS
- Introduction
- Installation
- Environment check
- Assembling the InstaShow Host
- Setting up the InstaShow Host
- Positioning the InstaShow Host antennas
- Connecting the HDMI cable and power
- Setting up and powering an InstaShow Button
- Pairing a InstaShow Button and InstaShow Host
- Waking up the InstaShow Host
- Storing InstaShow Buttons in the cradle
- Resetting a InstaShow Host
- Resetting a InstaShow Button
- Starting and stopping presentations
- Web management
- Troubleshooting
14 Installation
Installing the InstaShow Host on the wall or trolley
If you need to install the InstaShow Host near a display:
1. Use the round double-sided sponge tape provided to stick to the lid of the InstaShow Host.
2. Affix the InstaShow Host on the wall near the display.
3. Keep the antennas away from any signal obstructions.
You can also place the InstaShow Host on a mobile display trolley. See the illustration.
• Please only use the round double-sided sponge tape provided with the kit to stick the lid of the InstaShow
Host.
• Please wait 24 hours after you attach the double-sided sponge tape to the lid of the InstaShow Host.