User Manual
Table Of Contents
- Copyright
- Disclaimer
- BenQ ecoFACTS
- Introduction
- Installation
- Environment check
- Assembling the InstaShow Host
- Setting up the InstaShow Host
- Positioning the InstaShow Host antennas
- Connecting the HDMI cable and power
- Setting up and powering an InstaShow Button
- Pairing a InstaShow Button and InstaShow Host
- Waking up the InstaShow Host
- Storing InstaShow Buttons in the cradle
- Resetting a InstaShow Host
- Resetting a InstaShow Button
- Starting and stopping presentations
- Web management
- Troubleshooting
22 Installation
Pairing a InstaShow Button and InstaShow Host
A InstaShow™ set includes an InstaShow Host and two InstaShow Buttons, which are paired before
shipment. In such a case, you don’t need to pair them again. However, if you buy two or more sets of
InstaShow™, and you want to pair an InstaShow Button with a different InstaShow Host, you need to
follow the instruction below. If you buy an additional InstaShow Button kit, and you want to pair the
new InstaShow Buttons with your InstaShow Host, you need to follow the instruction below as well.
When the InstaShow Host is placed on a table
1. Make sure your InstaShow Host is ready with power supply. Connect the InstaShow Button’s
USB-C™ jack to the corresponding input of a laptop.
2. When the InstaShow Button is connected to the laptop, the LED indicator of the InstaShow
Button will flash red. The InstaShow Button is in pairing mode, waiting to pair with your
InstaShow Host.
If an InstaShow Button nearby has been paired with an InstaShow Host before, it will turn static green.
USB-C™
MODE