User Manual
Table Of Contents
- Copyright
- Disclaimer
- BenQ ecoFACTS
- Introduction
- Installation
- Environment check
- Assembling the InstaShow Host
- Setting up the InstaShow Host
- Positioning the InstaShow Host antennas
- Connecting the HDMI cable and power
- Setting up and powering an InstaShow Button
- Pairing a InstaShow Button and InstaShow Host
- Waking up the InstaShow Host
- Storing InstaShow Buttons in the cradle
- Resetting a InstaShow Host
- Resetting a InstaShow Button
- Starting and stopping presentations
- Web management
- Troubleshooting
23 Installation
3. Press the PAIRING key of the InstaShow Host for five seconds, the LED indicator of the
InstaShow Host will blink blue for two minutes, waiting to pair with an InstaShow Button.
If the InstaShow Host is attached to the ceiling so that it is not easy to press the PAIRING key, please use the
pairing process in the web management interface. Refer to Pairing on page 45 for information.
PAIRING
00:00:00
00:00:05