User Manual
Table Of Contents
- Copyright
- Disclaimer
- BenQ ecoFACTS
- Introduction
- Installation
- Environment check
- Assembling the InstaShow Host
- Setting up the InstaShow Host
- Positioning the InstaShow Host antennas
- Connecting the HDMI cable and power
- Setting up and powering an InstaShow Button
- Pairing a InstaShow Button and InstaShow Host
- Waking up the InstaShow Host
- Storing InstaShow Buttons in the cradle
- Resetting a InstaShow Host
- Resetting a InstaShow Button
- Starting and stopping presentations
- Web management
- Troubleshooting
24 Installation
4. Press the MODE key on the side of the InstaShow Button for five seconds. The LED indicator of
the InstaShow Button will blink blue for about 10 seconds. The pairing process is ongoing. The
“Pairing” message will be shown on the screen.
The images are for reference only. Each product has different serial number.
MODE
00:00:00
00:00:05
pairing...
pairing success, sn: WDX10001103G