User Manual
Table Of Contents
- Copyright
- Disclaimer
- BenQ ecoFACTS
- Introduction
- Installation
- Environment check
- Assembling the InstaShow Host
- Setting up the InstaShow Host
- Positioning the InstaShow Host antennas
- Connecting the HDMI cable and power
- Setting up and powering an InstaShow Button
- Pairing a InstaShow Button and InstaShow Host
- Waking up the InstaShow Host
- Storing InstaShow Buttons in the cradle
- Resetting a InstaShow Host
- Resetting a InstaShow Button
- Starting and stopping presentations
- Web management
- Troubleshooting
25 Installation
5. The LED indicator of the InstaShow Button turns static green when the InstaShow Host and
InstaShow Button are successfully paired.
Waking up the InstaShow Host
When the InstaShow Host’s power indicator turns 50% static green, press the Present key of the
InstaShow Button to start a presentation, and the InstaShow Host will wake up automatically.
Storing InstaShow Buttons in the cradle
You are provided with two different ways to store the InstaShow Buttons in the cradle. Place the
InstaShow Buttons in the cradle vertically (1) or horizontally (2). See the illustrations.
Resetting a InstaShow Host
Resetting an InstaShow Host allows you to return the InstaShow Host to its original factory settings.
You may want to reset the InstaShow Host because of either one of the following reasons:
The maximum number of InstaShow Buttons you can pair with one InstaShow Host is 16.
More standby mode and wake up options are configurable via the web management user interface. Refer to page
51 for information.
1
2