User Manual

26 Installation
• You want to clear the web management interface of all changes made to its configurations, such as
pairing information, passwords, SSID, Frame Rate, etc. and return it back to its default settings.
Refer to Web management on page 34 for more information.
• You are unable to access the web management interface (for instance due to an altered or lost
password).
Reset the InstaShow Host using the following steps:
1. Connect the DC/Micro-USB port on the InstaShow Host to a power source and wait for at least
30 seconds.
2. Poke the RESET hole at the rear of the InstaShow Host with a pin for at least 2 seconds.
3. The InstaShow Host LED will begin quick flashing red (flash red twice every second) for 10
seconds, then light up static red for 15 to 20 seconds, indicating that the InstaShow Host is
resetting.
4. Once the InstaShow Host LED lights up static green the resetting process is complete.
Resetting a InstaShow Button
Resetting an InstaShow Button allows you to return the InstaShow Button to its original factory
settings. You may want to reset an InstaShow Button because it has been paired to a different
InstaShow Host (one which was not originally included with the InstaShow Button in the package),
and you want to quickly pair it back to its original InstaShow Host.
Reset an InstaShow Button using the following steps:
1. Place the InstaShow Button within range of the original InstaShow Host and ensure the LED on
the InstaShow Host is static green.
After the InstaShow Host has been connected to a power source for at least 30 seconds, the InstaShow Host
LED may indicate any one of the statuses described in LED indicators of the InstaShow Button and InstaShow
Host. As long as the InstaShow Host
has been connected to a power source for at least 30 seconds, you may
proceed to the next step of the resetting process regardless of the status of the InstaShow Host
LED.
Do not disconnect the InstaShow Host from its power source at any time during the resetting process.