User Manual
Table Of Contents
- Copyright
- Disclaimer
- BenQ ecoFACTS
- Introduction
- Installation
- Environment check
- Assembling the InstaShow Host
- Setting up the InstaShow Host
- Positioning the InstaShow Host antennas
- Connecting the HDMI cable and power
- Setting up and powering an InstaShow Button
- Pairing a InstaShow Button and InstaShow Host
- Waking up the InstaShow Host
- Storing InstaShow Buttons in the cradle
- Resetting a InstaShow Host
- Resetting a InstaShow Button
- Starting and stopping presentations
- Web management
- Troubleshooting
27 Installation
2. Connect the USB-C™ connector on the InstaShow Button to a powered on laptop and wait for
at least 30 seconds.
3. Poke the RESET hole at the bottom of the InstaShow Button with a pin for at least 2 seconds.
4. The InstaShow Button LED will begin quick flashing red (flash red twice every second) for 10
seconds, then light up static red for 15 to 20 seconds, indicating that the InstaShow Button is
resetting.
5. Once the InstaShow Button LED lights up static green the resetting process is complete.
You may also want to reset an InstaShow Button under either one of the following conditions:
• You purchased an additional InstaShow Button (via an InstaShow Button Kit) which has not been
paired to an InstaShow Host.
• An InstaShow Button that was included in the original package has been paired to a different
InstaShow Host (one which was not originally included with the InstaShow Button in the package),
and you want to re-pair the InstaShow button to its original InstaShow Host while the InstaShow
Host is not powered on.
Under these conditions where the InstaShow Button is not connected to the corresponding
InstaShow Host and its LED flashes red, use the following steps to reset the InstaShow button:
1. Connect the USB-C™ connector on the InstaShow Button to a powered on laptop and wait for
at least 30 seconds.
After the InstaShow Button has been connected to a powered on laptop for at least 30 seconds, the InstaShow
Button
LED may indicate any one of the statuses described in LED indicators of the InstaShow Button and
InstaShow Host. As long as the InstaShow Button
has been connected to a powered on laptop for at least 30
seconds, you may proceed to the next step of the resetting process regardless of the status of the InstaShow
Button
LED.
After the InstaShow Button has been connected to a powered on laptop for at least 30 seconds, the InstaShow
Button
LED may indicate any one of the statuses described in LED indicators of the InstaShow Button and
InstaShow Host. As long as the InstaShow Button
has been connected to a powered on laptop for at least 30
seconds, you may proceed to the next step of the resetting process regardless of the status of the InstaShow
Button
LED.