User Manual
Table Of Contents
- Copyright
- Disclaimer
- BenQ ecoFACTS
- Introduction
- Installation
- Environment check
- Assembling the InstaShow Host
- Setting up the InstaShow Host
- Positioning the InstaShow Host antennas
- Connecting the HDMI cable and power
- Setting up and powering an InstaShow Button
- Pairing a InstaShow Button and InstaShow Host
- Waking up the InstaShow Host
- Storing InstaShow Buttons in the cradle
- Resetting a InstaShow Host
- Resetting a InstaShow Button
- Starting and stopping presentations
- Web management
- Troubleshooting
34 Web management
Web management
Your InstaShow™ is equipped with a web management interface that enables you to configure its
features through a browser such as Google Chrome (version 49.0.26), Internet Explorer (version
8.0), or Firefox (version 46.0.1).
Accessing the web management interface
Logging into the web management interface via direct connection
1. Connect your InstaShow Host directly to a laptop using a network cable (RJ-45) and to a power
source using a USB A(M) to micro B(M) cable.
2. Wait until the LED indicator on your InstaShow Host lights up static green.
The features may vary according to different firmware versions.