User Manual
Table Of Contents
- Copyright
- Disclaimer
- BenQ ecoFACTS
- Introduction
- Installation
- Environment check
- Assembling the InstaShow Host
- Setting up the InstaShow Host
- Positioning the InstaShow Host antennas
- Connecting the HDMI cable and power
- Setting up and powering an InstaShow Button
- Pairing a InstaShow Button and InstaShow Host
- Waking up the InstaShow Host
- Storing InstaShow Buttons in the cradle
- Resetting a InstaShow Host
- Resetting a InstaShow Button
- Starting and stopping presentations
- Web management
- Troubleshooting
36 Web management
4. On your browser, enter the IP address: 192.168.20.1. On the login page, enter the default user
name and password. The default user name is admin and the default password is either 0000 or
the SSID with a name of “WDC10_xxxxxx” (shown on the upper right corner of the Guide/Idle
screen).*
5. You will successfully log into the web management interface.
*: To comply with regional-specific regulation requirements, the default Web Management password varies
according to the product supplied for your region.