User Manual

43 Web management
When Wireless Network is enabled you can rename the SSID of the Wi-Fi signal via SSID
Setting.
To hide the SSID generated by the Host and used for data transfer (with a name of
“WHE_AP_5G_xxxxxx), set Hide Wireless Transmission SSID to Off.
Wi-Fi Security Option provides the user WPA2 and WPA2_Enterprise security options for
the InstaShow Host’s wireless connection when users access the web management interface via a
wireless network.
WPA2 enables WPA2-PSK (pre-shared key) which uses an Advanced Encryption Standard (AES)
encryption method.
WPA2_Enterprise allows users to get a unique key for a network that needs critical
authentication. For RADIUS server settings, contact your IT department for actual settings.
Disable The InstaShow Host deactivates its SSID which prohibits users from
logging into the web management interface via a wireless network.
When Wireless Network is disabled users will only be able to log
into the web management interface via direct connection or LAN.
Refer to Logging into the web management interface via direct
connection on page 34 or Logging into the web management interface
via LAN on page 37 for more information.
The InstaShow Host automatically generates an SSID used for data transfer between the InstaShow Host and
InstaShow Buttons (with a name of “WHE_AP_5G_xxxxxx”) which is separate from the SSID used for the web
management interface’s wireless connection. This SSID is not displayed in the Wireless Network menu as it
cannot be changed or edited.
The Wi-Fi security options described above only applies to the Wi-Fi connection used to access the web
management interface via a wireless network. The Wi-Fi connection used for data transfer between the
InstaShow Host and InstaShow Buttons utilizes a fixed WPA2-PSK security setting which cannot be changed.
Setting Description