User Manual
Table Of Contents
- Copyright
- Disclaimer
- BenQ ecoFACTS
- Introduction
- Installation
- Environment check
- Assembling the InstaShow Host
- Setting up the InstaShow Host
- Positioning the InstaShow Host antennas
- Connecting the HDMI cable and power
- Setting up and powering an InstaShow Button
- Pairing a InstaShow Button and InstaShow Host
- Waking up the InstaShow Host
- Storing InstaShow Buttons in the cradle
- Resetting a InstaShow Host
- Resetting a InstaShow Button
- Starting and stopping presentations
- Web management
- Troubleshooting
47 Web management
5. Press the MODE key on the side of the InstaShow Button for five seconds. The LED indicator
of the InstaShow Button will blink blue for about 10 seconds. The pairing process is ongoing. A
“Pairing” message will be shown on the screen.
6. The LED indicator of the InstaShow Button will turn static green when the InstaShow Host and
InstaShow Button are successfully paired.
• Images are for reference only. Each product features a different serial number.
• The maximum number of InstaShow Buttons you can pair with one InstaShow Host is 16.
MODE
00:00:00
00:00:05
pairing...
pairing success, sn: WDX10001103G