User Manual
Table Of Contents
- Copyright
- Disclaimer
- BenQ ecoFACTS
- Introduction
- Installation
- Environment check
- Assembling the InstaShow Host
- Setting up the InstaShow Host
- Positioning the InstaShow Host antennas
- Connecting the HDMI cable and power
- Setting up and powering an InstaShow Button
- Pairing a InstaShow Button and InstaShow Host
- Waking up the InstaShow Host
- Storing InstaShow Buttons in the cradle
- Resetting a InstaShow Host
- Resetting a InstaShow Button
- Starting and stopping presentations
- Web management
- Troubleshooting
48 Web management
7. You may press stop pairing anytime to stop the pairing process.
Advance Setting
Click Advance Setting to adjust picture quality and security settings.
You can change mode to Presentation mode, Video mode, and Low Power via Picture Quality
Mode. The default mode is Presentation mode. Be aware that after the firmware is upgraded to
v2.01, the default mode will be changed to Video mode. The mode set by Picture Quality Mode
in web management is the default mode next time when the InstaShow host restarts. That is, if the
mode is Video mode and is switched to Presentation mode by the InstaShow button while playing