User Manual

52 Web management
Network Standby Mode the LED will light up 50% static green and power consumption will be
roughly 2W. Set the time according to the available options in Standby Mode.
The InstaShow Host will enter Network Standby Mode under the following conditions:
• The InstaShow Host has broadcast the Guide screen or Idle screen for the amount of time set in
the Standby Mode field. In this circumstance the connected display will usually enter standby or
power saving mode after a set period of time based on the configured settings for the display.
The InstaShow Host will wake up from Network Standby Mode under the following conditions:
• A wireless connection is made between the InstaShow Host and an InstaShow Button (the LEDs on
both the InstaShow Host and InstaShow Button are lit up static blue).
HDMI Standby Mode, places the InstaShow Host in standby mode if there is no HDMI signal/
connection to the InstaShow Host for at least 10 minutes. When the InstaShow Host is in HDMI
Standby Mode the LED will be off and power consumption will be less than 0.5W.
The InstaShow Host will enter HDMI Standby Mode under either one of the following conditions:
• No HDMI cable connection is made between the InstaShow Host and a display for at least 10
minutes.
• The display which is connected to the InstaShow Host is powered off for at least 10 minutes.
The InstaShow Host will wake up from HDMI Standby Mode under either one of the following
conditions:
• The display which is connected to the InstaShow Host is powered on.
• The power button on the InstaShow Host is pressed.