User Manual
Table Of Contents
- Copyright
- Disclaimer
- BenQ ecoFACTS
- Introduction
- Installation
- Environment check
- Assembling the InstaShow Host
- Setting up the InstaShow Host
- Positioning the InstaShow Host antennas
- Connecting the HDMI cable and power
- Setting up and powering an InstaShow Button
- Pairing a InstaShow Button and InstaShow Host
- Waking up the InstaShow Host
- Storing InstaShow Buttons in the cradle
- Resetting a InstaShow Host
- Resetting a InstaShow Button
- Starting and stopping presentations
- Web management
- Troubleshooting
57 Web management
1. Pressing Export.
2. Choosing Open or Save the .exp file.
3. The following set values will not be exported:
You can have the InstaShow Host restore to Factory Default by pressing Return to Factory
Default Setting. Once you press the Return to Factory Default Setting button, a
confirmation window will pop up.
When the process is confirmed the InstaShow Host will begin restoring to Factory Default and the
LED will quick flash red (flash red twice every second) then restart. After the InstaShow Host
restarts the entire process is complete.
a. Information: Host Name
b. Wireless Network: SSID setting and password setting
c. Pairing: Pairing Status
1
2