User Manual
Table Of Contents
- Copyright
- Disclaimer
- BenQ ecoFACTS
- Introduction
- Installation
- Environment check
- Assembling the InstaShow Host
- Setting up the InstaShow Host
- Positioning the InstaShow Host antennas
- Connecting the HDMI cable and power
- Setting up and powering an InstaShow Button
- Pairing a InstaShow Button and InstaShow Host
- Waking up the InstaShow Host
- Storing InstaShow Buttons in the cradle
- Resetting a InstaShow Host
- Resetting a InstaShow Button
- Starting and stopping presentations
- Web management
- Troubleshooting
9 Introduction
LED indicators of the InstaShow Button and InstaShow Host
Please refer to the tables below for detailed indicator and status descriptions for the InstaShow
Button and InstaShow Host.
LED indicator on the
InstaShow Button
Status Description
Static blue The device is presenting.
Flashing blue The device is in pairing state for 10 seconds.
Flashing green The device is upgrading the firmware.
Static green The device is connected and working normally.
Flashing red
The device is trying to connect to an
InstaShow Host or encountering a problem.
Static red The device is starting up.
Off The device is powered off.
Quick flashing red The reset process is triggered.
LED indicator on the
InstaShow Host
Status Description
Static blue Connected device is presenting.
Flashing blue
The device is in pairing state for 2 minutes.
Flashing green The device is upgrading the firmware.
50% static green The device is in network standby mode.
Static green The device is on and ready for connection.
Flashing red The device is encountering a problem.
Static red The device is starting up.
Off The device is powered off.
Quick flashing red The reset process is triggered.