Operation Manual

24 Connection
Connecting a component video source device
Examine your video source device to determine if it has a set of unused component video
output sockets available:
• If so, you can continue with this procedure.
• If not, you will need to reassess which method you can use to connect to the device.
To connect the projector to a component video source device:
1. Take a Component Video to VGA (D-Sub) adapter cable and connect the end with 3
RCA type connectors to the component video output sockets of the video source
device. Match the color of the plugs to the color of the sockets; green to green, blue
to blue, and red to red.
2. Connect the other end to the PC socket on the projector.
3. If you wish to make use of the projector’s built-in speakers, take a suitable audio cable
and connect one end of the cable to the audio output sockets of the video source
device, and the other end to the audio input socket on the projector.
• When audio output jack is connected with the earphone or external speaker, the sound will
not come out from the projector’s built-in speakers.
• No sound will come out from the projector’s built-in speakers or audio output jack if video
signals are not input. Besides, the sound cannot be adjusted either.
Component Video to VGA
(D-Sub) adapter cable
Audio cable
A/V device
CH100_EN.book Page 24 Wednesday, March 2, 2016 11:54 AM