Operation Manual

37Menu functions
If you intend to switch from the Basic OSD menu to the Advanced OSD menu, follow
the instructions below:
Use the arrow keys (///) to move through the menu items, and use to
confirm the selected menu item.
• When there is a video signal connected to the projector:
i. Go to the Settings menu > Menu Type and press .
ii. Use / to select Advanced and press .
iii. Press to exit.
iv. Press again to access the Advanced OSD menu.
• When there is NO video signal connected to the projector:
i. Go to Menu Type and press .
ii. Use / to select Advanced and press .
iii. Press to exit.
iv. Press again to access the Advanced OSD menu.
Next time when you turn on the projector, you may access the Advanced OSD menu by
pressing .
Below is the overview of the Advanced OSD menu.
Likewise, when you wish to switch from the Advanced OSD menu to the Basic OSD
menu, follow the instructions below:
i. Go to the System Setup : Basic menu > Menu Settings > Menu Type.
ii. Use / to select Basic.
iii. Press repeatedly until the OSD menu is closed.
iv. Press to access the Basic OSD menu.
Picture
Picture Mode
Graphic (sRGB)
User Mode Management
Brightness
50
Contrast
50
Color Enhancer
50
Tint
50
Pixel Enhancer
7
Color Temperature
Normal
LED Mode
Advanced...
Reset Current Picture Mode
PC / Component
Exit
CH100_EN.book Page 37 Wednesday, March 2, 2016 11:54 AM