User's Guide

4English
Maintenance and Troubleshooting
• First Turn off the lamp and unplug the lamp from the USB port. When cleaning the lamp, wipe
off any smears or dusts using a soft, lint-free cloth lightly moistened with a mild detergent
solvent. Do not use alcohol or any other chemical solvents like kerosene, naphtha and so on, as
the lamp's casing may become damaged.
• Do not rinse the lamp or any of its components directly with water.
• If the lamp does not turn on, check to make sure that there are no loose connections between
the USB cable and USB port.
• The light flashes when the power supply of the lamp is insufficient (less than 5V). Connect the
lamp to another USB port that provides 5V output voltage to solve this problem.
• If the problem persists, please contact the place of purchase for help.
Specifications
Model CR20 _C
DC power input 5V, 1.3A
Max. power consumption 6.5W
Dimensions (Width x Depth x Height)
Lamp: 500 x 94.7 x 97.1 mm
Wireless controller: 74 x 74 x 38.4 mm
35°
500 mm (19.7 in)
35°
94.7 mm (3.7 in)
97.1 mm
(3.8 in)
74 mm (2.9 in)
38.4 mm (1.5 in)