Operation Manual

BenQ DC 1500 User’s Manual
6
2.5.4. Forced Shut Down Mode
The DC 1500 supports forced shut down function. If the DC 1500 fails to operate
normally, you can press the “Down” button and the capture button at the same time to
forced the DC 1500 to be shut down. To turn on the power, press the “Power” but-
ton for 2 seconds again.
2.6. Taking Photos
Make sure the camera enters camera mode , burst mode or self-timer
mode .
2.6.1. To take photos using the viewfinder
Point the camera to the object and make the object appear on the
center of the viewfinder.
2.6.2. To take photos using the LCD monitor
When the camera power is turned on, the LCD monitor will be turned on at the
same time. The camera beeps once and enters camera mode, the icon and
other relative icons will also appear on the LCD screen.
The image will appear on the LCD monitor, move the camera until the image on the
LCD monitor is on the desired position.
focus
The images will appear
on the LCD monitor.