Operation Manual

BenQ DC 2410 User’s Manual
28
5. T
ROUBLESHOOTING
(E
RROR
M
ESSAGE
T
ABLE
)
Message Cause Solution
CARD FULL There is insuffient card mem-
ory capacity to store an
image.
Delete the stored image(s) in
the memory card or insert a
new memory card.
MEMORY FULL There is insuffient internal
memory capacity to store an
image.
Delete the stored image(s) in
the flash memory.
CARD LOCKED (CARD
ICON is BLINKING)
The SD card is under protec-
tion.
Set the card protection
switch at non- protection
position.
LOCK The image can’t be deleted
under protection.
Unlock the protected image.
NO IMAGE There is no image stored in
the memory card or built- in
flash memory.
FILE ERROR The camera flash is turned
off.
Delete this image and take
the picture again.
MEMORY ERROR Format the flash memory.
CARD ERROR Insert a new memory card.
USB ERROR USB connection erroor. Check USB cable connection.
LOW LIGHT! The environment is too dark
with “Flash Off” mode.
Set the flash modeat Auto
Flash or Fill-in Flash.
HAND SHAKE ICON The environment is too dark
with “Flash Off” mode.
Set the flash modeat Auto
Flash or Fill-in Flash.
LENS COVER The lens cover is closed. Please open the lens cover
before taking pictures.