User's Manual

BenQ DC 5330 User’s Manual

2. P

REPARING

YOUR

DC 5330

FOR

USING

2.1. How to Switch On or Switch Off The Camera

2.2. Loading the battery and SD Card:

Note

The backside LED indicator will remain green while the power is turned ON.

1. Locate the power button on top of the camera.

2. Press the power button down to turn the

camera ON or OFF.

Power ON/OFF Button

This camera uses a Li-ion battery. The battery and SD card share the same compartment

and cover.

1. Slide the battery/SD Card cover in the direction

of the arrow, then lift to open.

2. Load the included battery in the compartment.

3. Insert the SD card into the slot.

4. Close the cover.

Battery Power Status

Full

Middle

Low

Empty

CAUTION!

1. Fully charge the battery before its first use.

2. To improve battery performance, replace installed battery at the same time and keep

away from heat.

3. To discard battery, refer to the index of the battery manufacturer.

4. Battery should be inserted in the battery compartment with the "+" and "-" sides

facing correctly.