User manual

Capture mode 13
English
White balance
Compensates for color temperatures in different lighting conditions, so white and other
colors can display properly when you capture images.
To select white balance:
1. Press > > White Balance.
2. Press or , and select a white balance option. (When selecting the manual mode,
you must first point the adjustment frame shown on the screen at a blank sheet of white
paper or something similar, and press the Shutter for the camera to detect proper colors.)
3. Press or > .
ISO sensitivity
ISO configures the camera’s sensitivity to light. The higher the ISO value, the brighter
picture you can take in a low-light environment. Yet, you may see more noise in the picture
as you increase the ISO value.
To select an ISO value:
1. Press > > ISO.
2. Press or , and then select an ISO value.
3. Press or > .
Icon Mode Description
Auto Adjusts white balance automatically.
Daylight Used in bright daylight conditions.
Cloudy Used in twilight or shady conditions.
Tungsten Used when subjects lit by tungsten (incandescent) lighting.
Fluorescent Used when subjects lit by fluorescent lighting.
Manual Used when you want to manually adjust white balance in a
particular lighting condition.
Icon Description
Automatically sets the ISO value.
Equivalent to color ISO 80/160/320 film. Used for outdoor
photography in bright sunlight.
Equivalent to color ISO 400/800/1250 film. Used it in a low-light
environment or where the flash light is not allowed.
X725 UM.book Page 13 Friday, March 30, 2007 2:15 PM
Downloaded From camera-usermanual.com BenQ Manuals