User manual

18 Playback mode
English
Rotating an image
Changes the orientation of an image.
To rotate an image:
1. Press > or to move to the image you want to rotate.
2. Press .
3. Press or to change the image to a different orientation.
4. Press to confirm the change and save the image file.
You can also press > > Rotate > or to rotate an image.
Slideshow
Sets the time interval for presenting a series of captured image and video files (first frame
only).
To play a slideshow:
1. Press > > > Slideshow > or .
2. Press or to select a time interval, and then press .
3. The slideshow will automatically play. If you want to pause it at any time, press . Press
again to resume playback. To stop the slideshow, press .
Z-Lighting
Enhances the brightness and contrast in the darker areas of
a picture to improve overall exposure quality.
To apply Z-Lighting to an image:
1. Press > or to move to the image you want to
apply Z-Lighting.
2. Press > > Z-Lighting > or .
3. Press , or to adjust the Z-Lighting value.
4. Press to confirm the change and how to save the image file.
Trimmi ng
Crops part of an image file, reduces the image size, and overwrites the image file or saves it
as another new file.
To trim an image:
1. Press > or to move to the image you want to trim.
2. Press > > Trim > or .
3. Press or to select the target image size to which you want to reduce.
4. Press , , , or to locate the area to trim.
5. Press to confirm the change and how to save the image file.
If an image was rotated before, it will revert to its original orientation before you can trim it.
X835 UM.book Page 18 Thursday, September 20, 2007 4:23 PM
Downloaded From camera-usermanual.com BenQ Manuals