Operation Manual

Touring the camera 3
English
1. LCD display
2. Mode switch - Toggle among Capture
(photo), Capture (movie), and Playback
modes
3. Status LED
4. MENU button or return to the
previous menu
5. Strap eyelet
6. Multifunctional buttons (including a
4-way control and a button)
7. Function (Fn) / Delete button -
Activate the function menu (Capture
mode) or delete photos (Playback mode)
Indicator State Description
Status LED No light The digital camera is off.
Solid green The digital camera is ready to capture images.
Blinking green The digital camera is powering on and cannot focus
or capture video clips, or is in the power-saving
mode.
The flash is charging, or the USB communication/
transfer is in progress.
Self-timer LED Blinking red The self-timer function is activated.
• It is normal for the camera to become warm during operation, because the camera
casing can conduct heat.
• The LCD display on this camera is manufactured with sophisticated technology, and
more than 99.99% of the pixels on the LCD display meet standard specifications. Yet, it
is possible that less than 0.01% of the pixels on the LCD display may have some light
spots or show unusual colors. This is normal and does not indicate display
malfunction, nor will this affect the pictures you take with the camera.
• The LCD monitor looks darker in strong sunlight or bright light. This is not a
malfunction.
• To prevent your images from being blurred while pressing the shutter button, always
hold the camera steady. This is especially important when you are shooting under low
lighting conditions, under which your camera may reduce the shutter speed to ensure
your images are properly exposed.
E123X
E103X_E123X_UM - EN.book Page 3 Thursday, August 6, 2009 10:37 AM