User's Manual

25Calling
right page (25) of E81 en A31nnn-Xnnnn-Xn-n-nnnn (22.08.2006, 17:39)
BenQ 2006, D:\UM\Merlin\Merlin_EN\Merlin_Main.fm
Template: Minion, 140x105 mm, Version 1.5; VAR Language: unknown; VAR issue date: 12-March-2003
Rejecting a call
Press or (Reject).
Handsfree talking
You can put the phone aside during a
call and hear the caller via the
loudspeaker.
Press (Options) and select Hands
free to activate/deactivate handsfree
talking.
Swapping between 2 calls
(Network support dependent and not
available during video calls)
Establish a second connection
1. Press (Options) and select Hold
call. The active call is put on hold.
2. Dial a new number and press
or .
Alternatively, dial the new number and
press or . The active call is
put on hold.
Swapping calls
When the new connection is established
you can swap between calls:
Press .
Or
Press (Options) and select Swap.
Incoming calls during a call
You will hear a special tone during the
call (page 82). You have the following
options:
Accepting the waiting call in addition
to the first
Press , or (Swap)to
accept the waiting call. The current call
is put on hold.
To swap between the two calls when two
connections are established, press
.
Or
Press (Options) and select Swap.
Rejecting the waiting call
Press (Reject).
Accepting the waiting call, ending the
current call
1. Press to end the current call.
2. Press , or (Answer)
to accept the new call.
Warning!
Please make sure you have accepted the
call before holding the phone to your ear.
This will avoid damage to your hearing
from loud ringtones.
Warning!
Always switch off "handsfree talking"
before holding the phone to your ear!
Otherwise you will damage your hearing!
Additional information
During a video call the speakerphone
(loudspeaker) is activated by default.