User manual

30 How to adjust your monitor
Display Mode This feature is provided to
allow aspect ratio’s other
than 16:9 to be displayed
without geometric
distortion.
• Overscan -Slightly
enlarges the input image.
Use this feature to hide
annoying edge noise if
present around your
image.
• Full - Scales the input
image to fill the screen.
Ideal for 16:9 aspect
images.
• Aspect - The input image
is displayed without
geometric distortion
filling as much of the
display as possible. 16:9
images will fill the screen
horizontally while 4:3
images will fill the screen
vertically.
• (E900HD, E900HDA,
E900HDP, and E900HDAP
only) For the first time
using this monitor with the
resolution 1360x768, the
default Display Mode is
Aspect.
Press the or keys
to change the settings.
The options under
Display Mode will be
different depending on the
input signal sources.
When the signal
source is from a
DVI or D-sub
source, and the
input image is of
non-wide aspect
ratio:
• Full
• Aspect
Or
When the signal
source is from a
HDMI source:
• Overscan
• Full
• Aspect
AMA
(available for
E2200HD,
M2200HD,
E2400HD, and
M2400HD)
Improves the gray level
response time of the LCD
panel.
Press the or keys
to change the settings.
• ON
• OFF
The ON/OFF
options are
available for
E2200HD and
M2200HD only.
For E2400HD and
M2400HD, AMA is
always on.