Operation Manual

37 How to adjust your monitor
Video source selection in PIP/PBP mode
If Source Auto Search (page 41) is turned on, your monitor scans for the available video sources in
the following order: VGA, DVI-D, HDMI 1, HDMI 2, and Component, and displays the first
available one. This video source will become the main source in PIP/PBP mode. You will need to
decide the second source for PIP/PBP mode from the menu in PIP/PBP Source on page 37. Menu
options that are not available will become grayed out.
Refer to the following table to find your main source and its supporting second sources.
PIP/PBP Source Sets the second video source
for the PIP/PBP mode.
Press the or keys to
change the settings.
• VGA
• DVI-D
• HDMI 1
• HDMI 2
• Component
PIP Size Determines the size of the
inset window in the PIP
mode.
Press the or keys to
change the settings.
• Small
• Medium
• Large
H. Position Adjusts the horizontal
position of the inset window
in the PIP mode.
Press the or keys to
change the settings.
0 to 100
V. Position Adjusts the vertical position
of the inset window in the
PIP mode.
0 to 100
Contrast Adjusts the contrast of the
inset window in the PIP/PBP
mode.
Press the or keys to
change the settings.
To adjust the contrast and
the sharpness of the main
source, go to the PICTURE
menu. See page 29 for
more information.
0 to 100
Sharpness Adjusts the sharpness of the
inset window in the PIP/PBP
mode.
1 to 10
Possible second sources
Inputs VGA DVI-D HDMI 1 HDMI 2 Component
Main source
VGA VVV
DVI-DV VVV
HDMI 1 V V V
HDMI 2 V V V
Component VVV