Operation Manual

41 How to adjust your monitor
*DDC/CI, short for Display Data Channel/Command Interface, which was developed by Video Electronics
Standards Association (VESA). DDC/CI capability allows monitor controls to be sent via the software for
remote diagnostics.
CEC
(EW2730V only)
When activated and the
monitor is connected to a
multimedia device
supporting CEC feature
through HDMI, the device’s
remote control can be used
to turn on the device and the
monitor simultaneously. If
the monitor is switched off,
the device is off as well.
Synchronization with other
devices through HDMI
CEC may be available but
not guaranteed.
Press the ENTER key to select
this option. Press the or
keys to change the
settings.
• ON
• OFF
Source Auto
Search
When this function is
activated, HDMI and
Component ports will be in
the input auto select loop.
Otherwise, these sources can
only be selected by input
select or by hot key.
Press the
ENTER key to select
this option. Press the or
keys to change the
settings.
• ON
• OFF
Auto Power Off Sets the time to power off the
monitor automatically in
power saving mode.
Press the
ENTER key to select
this option. Press the or
keys to change the
settings.
• OFF
• 10min.
• 20min.
• 30min.
Information Displays the current monitor
property settings.
• Input
• Current
Resolution
• Optimum
Resolution (best
with the
monitor)
• PIP/PBP Status
• PIP/PBP Source
• PIP/PBP
Resolution
• Model Name
Reset All Resets all mode, color and
geometry settings to the
factory default values.
Press the or keys to
change the settings.
• YES
• NO