User Manual

42 Navigating the main menu
Custom Key 1 Sets the function to be accessed by custom key 1. • Picture Mode
• Color Vibrance
• Brightness
• Low Blue Light
• Super
Resolution
• Display Mode
• Volume
• Contrast
Custom Key 2 Sets the function to be accessed by custom key 2.
Custom Key 3 Sets the function to be accessed by custom key 3.
DDC/CI Allows the monitor settings to be set through the
software on the PC.
DDC/CI, short for Display Data Channel/Command Interface,
which was developed by Video Electronics Standards
Association (VESA). DDC/CI capability allows monitor controls
to be sent via the software for remote diagnostics.
• ON
• OFF
FreeSync Enables FreeSync function to eliminate screen tearing,
stuttering, and juddering during gaming.
• Normal
• Premium
USB-C
Configuration
Sets the refresh rate of the input video via USB-C™ port.
The USB transmission speed changes accordingly due to
USB-C™ technology limitation. See Options for data
transfer via USB-C™ on page 43 for more information.
• QHD@120Hz +
USB 2.0
• QHD@60Hz +
USB 3.1
DP Auto
Switch
When this function is activated, DP port will be in the
input auto select loop. Otherwise, DP can only be
selected by input select or by hot key.
• ON
• OFF
HDMI Auto
Switch
When this function is activated, HDMI port will be in the
input auto select loop. Otherwise, HDMI can only be
selected by input select or by hot key.
•
ON
• OFF
USB-C Auto
Switch
When this function is activated, USB-C™ port will be in
the input auto select loop. Otherwise, USB-C™ can only
be selected by input select or by hot key.
• ON
• OFF
Auto Power
Off
Sets the time to power off the monitor automatically in
power saving mode.
• OFF
• 10min.
• 20min.
• 30min.
Resolution
Notice
Sets whether to display the resolution notice of the
recommended resolution when a new input source is
detected by the monitor.
• ON
• OFF
Item Function Range