User Manual

17 Using the monitor wall mount set (purchased separately)
Using the monitor wall mount set (purchased separately)
The back of your monitor has screw holes to fix the stand and the base. A VESA standard
mount bracket with 100mm pattern could be installed via installing a special transfer kit made
for this model. Should you need the VESA wall mount transfer kit, please contact BenQ
service.
Before starting to install the monitor wall mount set, please read the precautions carefully.
Precautions
• Install your monitor and monitor mount set on a wall with flat surface.
• Ensure that the wall material and the standard wall mount set (purchased separately) are
stable enough to support the weight of the monitor. Refer to the product specifications for
weight information.
• Turn off the monitor and the power before disconnecting the cables from the LCD monitor.
1. Remove the monitor stand and base.
While the monitor is inside the box, remove the stand
hinge cover with a opening pry tool (purchased
separately).
Release the screws fixing the stand to the monitor.
Lift the end of the stand arm up to remove it from the
monitor.