Benq FP2081 LCD Color Monitor 20.
Benq LCD Color Monitor User's Guide Copyright Disclaimer 2002. Benq Corporation (formerly Acer Communications & Multimedia Inc.). All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of Benq Corporation.
Benq LCD Color Monitor User's Guide = Table == of Contents Unpacking .......................................................................................................................................... 3 Views of the Monitor ..................................................................................................................... 4 Installation .........................................................................................................................................
Benq LCD Color Monitor User's Guide Unpacking Please check you have the following items. If they are missing or are damaged, please contact the dealer immediately at which you purchased the good.
Benq LCD Color Monitor User's Guide Views of the Monitor Front View Back View (1) English 4
Benq LCD Color Monitor User's Guide Back View (2): Locations of plugs & sockets 1. Power adaptor jack 2. D-Sub port 3. DVI-D port 4. S-Video port 5. Composite port 6. Power cord 7. D-Sub signal cable 8. DVI-D signal cable 9. S-Video signal cable 10.
Benq LCD Color Monitor User's Guide Installation Hardware Installation A. Make sure that the computer and monitor’s power are both turned off. Please follow the steps to install your LCD monitor. 1 . Connect the signal cable and power adaptor to Benq LCD monitor. 2 . Please connect power cord to power adaptor first and then connect the power adaptor to LCD monitor. B. Connect the signal cable to the VGA output of the graphics card on the computer. There are 4 types of signal cables: a.
Benq LCD Color Monitor User's Guide Adjusting the Monitor On-Screen" Operation Procedure for FP2081 There are 8 keys for user's control, which includes " Power" , " iKey ", "Input" , " Menu ", " ↑ ", " ↓ " , " +" , and "-" . The following descriptions are the introduction of these keys. a) "Power"key: The function of this key is to tune monitor power on/off. b) "iKey" key: For auto adjust vertical position, horizontal position, pixel clock and phase.
Benq LCD Color Monitor User's Guide 3. Luminance: Press " ↑ " or " ↓ " to select Luminance item and press "Menu" to enter Luminance submenu. Press " ↑ " or " ↓ " to select between Brightness and Contrast functions. When those keys are highlighted, the highlight function is activated then press "+" or "-" to adjust the Brightness or Contrast of the display.
Benq LCD Color Monitor User's Guide b) V. Position: Press "Menu" to show the bar of adjustment, press "+" or "-" to adjust the vertical position of the display and then press "Menu" to back to the previous screen. c) Pixel Clock: Under Geometry sub-menu, press "Menu" to show the bar of adjustment, press "+" or "-" to adjust the volume of Pixel Clock and then press "Menu" to back to the previous screen.
Benq LCD Color Monitor User's Guide 6. OSD: The function OSD is to change the position of OSD on screen. Press " ↑ " or " ↓ " to select OSD function from main menu and press "Menu" to enter OSD sub-menu. Press " ↑ " or " ↓ " to select H. Position, V. Position, and OSD Time. a) H. Position: Under OSD sub-menu, use the "↑" or "↓" buttons to select H. Position. By pressing "+" or "-" to increase or decrease the volume of H. Position.
Benq LCD Color Monitor User's Guide 8. Recall: The function of "Recall " is to reset controls return the settings to the factory preset values for the selected group of functions. Press " ↑ " or " ↓ " to select Recall function from main menu and press "Menu" to enter Recall sub-menu. Then press " ↑ " or " ↓ " to select among Position Recall, Recall All, and Color Recall then press Menu to execute. 9. PIP: The function of "PIP " is to set the Picture-In-Picture window.
Benq LCD Color Monitor User's Guide b) PIP size: Under PIP sub-menu, use the " ↑ " or " ↓ " buttons to select PIP Size then press Menu to enter PIP Size sub-menu. There are three sizes of PIP window included Small, Medium, and Large. By pressing "+" or "-" to select among Small, Medium, and Large. Then press "Menu" once to back to the PIP sub-menu or twice to back to main menu. c) Hue: Under PIP sub-menu, use the "↑" or "↓" buttons to select Hue.
Benq LCD Color Monitor User's Guide Troubleshooting Frequently Asked Questions (FAQ) ✓ The image is blurred: ☞ Read the chapter, Installation/Adjustment and then select the correct resolution, refresh rate and make adjustments based on these instructions. ☞ Do you use a VGA extension cable? Remove the extension cable for the test. Is the image now in focus? If not, optimize the image working on the description in the chapter, Installation/Adjustment.
Benq LCD Color Monitor User's Guide If the LED is illuminated in orange, then the power management mode is active. Press a button on the computer keyboard or move the mouse. If that does not help, then check the VGA cable contacts. If any pins are bent or broken off, then contact your dealer or read the chapter, Additional Help, Repairs & Service. ☞ Is the prompt on the display not illuminated at all? Check the power supply mains socket, the external power supply and the mains switch.
Benq LCD Color Monitor User's Guide Supported operating modes Resolution Refresh Rate ( Hz ) H. Freq. ( kHz ) 720 x 400 70.087 31.469 640 x 480 59.940 31.469 640 x 480 75.000 37.500 800 x 600 60.317 37.879 800 x 600 75.000 46.875 1024 x 768 60.004 48.363 1024 x 768 75.029 60.023 1280 x 1024 60.000 64.000 1280 x 1024 75.025 79.976 1600 x 1200 60.000 75.000 hModes, which are not listed in the above table, may not be supported.
Benq LCD Color Monitor User's Guide Specifications Model FP2081 Display type 20.1",active, TFT Viewable diagonal 51cm Native (maximum) resolution 1600X1200 Colors 16.
Benq LCD Color Monitor User's Guide Appendix: An Introduction to LCD Technology Principles of LCD Technology The functionality of LCD (Liquid Crystal Display) screens is based on the special physical properties of liquid crystals. Their rod shaped molecules arrange themselves similarly to the molecules of crystals - always uniformly and in one particular direction. Yet liquid crystals are not set in this orientation, but behave like a liquid: They can be manipulated by applying an electric voltage.
Benq LCD Color Monitor User's Guide C. Comparison of standard and super TFT display Standard Super h good gray level resolution h very good viewing angle hF satisfactory viewing angle hsatisfactory gray level resolution Field of applications: hImage processing hmedical field hStandard workstation hBanks (confidential area) Field of applications: his several people are working at one screen. hStandard workstation hPresentation tasks hBanks (public area) Important LCD parameters A.
Benq LCD Color Monitor User's Guide Display errors A. Pixel errors Pixel errors are (unfortunately) unavoidable with today's production methods, if you want to manufacture displays at an economically sensible price. A display with a resolution of 1600x1200 dots therefore has 1920000 pixels. Each pixel consists of the three sub-pixels for red, green and blue. That makes 5,760,000 individual control transistors.
Benq LCD Color Monitor User's Guide Comparison of CRT & LCD monitors CRT monitor Flat panel display Advantages: Advantages: hMultiscan monitor. hno geometry errors hsame quality in all resolutions.