Benq FP567 LCD Color Monitor 15.0" (38.
Benq LCD Color Monitor User's Guide Copyright Disclaimer Safety Instructions Copyright © 2002 by BENQ Corporation (formerly Acer Communications & Multimedia Inc.). All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of BENQ Corporation.
Benq LCD Color Monitor User's Guide Table of Contents Unpacking ............................................................................................................ 3 Views of the Monitor .......................................................................................... 4 Front View ....................................................................................................................................................... 4 Back View (1) ..........................................
Benq LCD Color Monitor User's Guide Unpacking Please check you have the following items. If they are missing or are damaged, please contact the dealer immediately at which you purchased the good.
Benq LCD Color Monitor User's Guide Views of the Monitor Front View Back View (1) English 4
Benq LCD Color Monitor User's Guide Back View (2): Locations of plugs & sockets 1. Power AC input jack 2. Audio jack 3. Video cable 4. Power cord 5.
Benq LCD Color Monitor User's Guide Installation Hardware Installation A. Make sure that the computer and monitor’s power are both turned off. Please follow the steps to install your LCD monitor. 1 . Assemble the extension base 2 . Connect the power cord to BENQ LCD monitor. 3 . Connect the audio cable to the Audio Input of Benq LCD monitor. B. Connect the signal cable to the VGA output of the graphics card on the computer. C. Connect the audio cable to your computer. D.
Benq LCD Color Monitor User's Guide Adjusting the Monitor A Look at the Control Panel ikey Exit < > Enter There are 6 keys for user’s control including “iKey”, “Exit”, “Enter”, “<” and “>” key and a power swith.The following descriptions are the introduction of these keys & switch. 1. “Power”: Turn the power on or off. 2. “iKey” : Adjust vertical position, phase, horizontal position and pixel clock automatically. 3. “Exit” key: Back to main menus, save menu or exist OSD menu without saving. 4.
Benq LCD Color Monitor User's Guide Volume hot-key 1. Press “Exit” key to enter the Voulme hot-key mode. 2. Press “<” or “>” key to make adjustment. The scale can be adjusted from maximum (100) to minimum (0). 3. Press the “Exit” to leave OSD operation. The adjustment can be auto-saved. Main Menu Mode Control Functions Available in Main Menu 1. Luminance Press “<”or “>” key to select this item and press “Enter” to enter sub-menu. There are two items for luminance adjustments.
Benq LCD Color Monitor User's Guide 2. Geometry Press “<”or “>” key to select this item and press “Enter” to enter sub-menu. There are four items for geometry adjustments. H. (Horizontal) Position: adjusts the horizontal position of the display. V. (Vertical) Position: adjusts the vertical position of the display. Phase: adjusts the phase of pixel clock. Pixel Clock: adjusts the frequency of the pixel.
Benq LCD Color Monitor User's Guide 3. Color Adjustment Press “<”or “>” key to select this item and press “Enter” to enter sub-menu. There are four items for color adjustments. There are three items to adjust. Press “<”or “>”key to select a color and press “Enter” to adjust color temperature. 4. Miscellaneous Press “<”or “>”key to select this item and press “Enter” to enter sub-menu. There are three items for miscellaneous. OSD Position : to adjust position of OSD.
Benq LCD Color Monitor User's Guide Language: to select OSD language. OSD Time: to set the standby time of OSD. Volume: to adjust volume of speaker. H. (Horizontal) Position: adjusts the OSD horizontal position of the display. V. (Vertical) Position: adjusts the OSD vertical position of the display.
Benq LCD Color Monitor User's Guide Press “<”or “>”key to select a language then press ”Exit” to back to previous menu. 5. Information “Information” sub menu the OSD display the resolution, horizontal and vertical refresh rate. Press “Enter” to recall to factory setings.
Benq LCD Color Monitor User's Guide Troubleshooting Frequently Asked Questions (FAQ) The image is blurred: Read the chapter, Installation/Adjustment and then select the correct resolution, refresh rate and make adjustments based on these instructions. Do you use a VGA extension cable? Remove the extension cable for the test. Is the image now in focus? If not, optimize the image working on the description in the chapter, Installation/Adjustment.
Benq LCD Color Monitor User's Guide Is the prompt on the display not illuminated at all? Check the power supply mains socket, the external power supply and the mains switch. The image is or distorted, flashes or flickers: Read the chapter, Installation/Adjustment and then select the correct resolution, refresh rate and make adjustments based on these instructions.
Benq LCD Color Monitor User's Guide Supported operating modes Incoming display mode (Input timing) Resolution Horizontal Frequency (KHz) Vertical Frequency (Hz) Pixel Frequency (MHz) Comment 640x350 31.47(P) 70.08(N) 25.17 DOS 720x400 31.47(N) 70.08(P) 28.32 DOS 640x480 31.47(N) 60.00(N) 25.18 DOS 640x480 37.86(N) 72.80(N) 31.50 VESA 640x480 37.50(N) 75.00(N) 31.50 VESA 800x600 35.16(P) 56.25(P) 36.00 VESA 800x600 37.88(P) 60.32(P) 40.00 VESA 800x600 48.08(P) 72.
Benq LCD Color Monitor User's Guide Specifications Model FP567 567Display type 15.0" ,active, TFT Viewable diagonal 38.1 cm Native (maximum) resolution 1,024X768 Colors 16.7 million Contrast / Brightness 350:1 / 250 cd/m² Response time 30 ms Viewing angle (left/right, up/down) 60/60, 40/60 Line frequency 31.47 - 60.02 kHzMulti- frequency monitor Image frequency 56.25 - 75.
