Service manual

18.5″ LCD Color Monitor BenQ G925HDA

Factory OSD Menu

Turn off the monitor, keep pressing the “MENU” buttons, and turn on the monitor, then when we press the MENU

button, the factory OSD will be at the left top of the panel as below (takes E2220HD for example):

BenQ Service Page

1. Trigger method: press “Menu” key and Power on.

2. Press the menu key will display the service page

3. Press the menu key will close the service page.

4. Power off will quit the service mode

5. At the service mode, the key function is same as normal OSD define.

6. The timer can only reset at the service mode by “Timer Reset” (Timer Reset moves to SI factory Area). And

need to have a warning message to double confirm the reset function. The timer should record up to 99999

hours and will be reset once launch.

7. Add two selected items for DVI HDCP at Service menu

HDMI HPD: To enable the hot plug pin detection. (HDMI port default: On)

DVI HDCP: To disable the hot plug pin detection. (DVI port default: on)

8. Add BenQ logo on/off item, the default is “on”

9. Add the auto power on item, the default is “off ”

10. Add the timer reset warning message, when select the timer reset item, then the warning message will display

and need to confirm it again and the default is “No”.

11. Panel type define need to have the panel version.

12. F/W version need to define the dual or analog model.