User manual

12
Turn the Camera On by Pressing Playback Button
1. Press the 7 button for about 3 seconds to turn the camera on and begin playback.
 Lens do not zooms out/in in this playback
preview.
 The camera will turn off automatically if no
operations are performed for the length of time
selected in the Auto off menu.
2. Press the 7 button again or press the ON/OFF
button to turn the camera off, or press the shutter
button to enter the capture mode.
Charging the Battery
The battery is not fully charged at the time of purchase. Fully charge the battery and discharge
it for at least one complete cycle before use to maximize its performance and lifetime.
1. Connect camera to USB-AC adapter with USB cable.
2. Insert the plug into a wall outlet.
 The included USB-AC adapter differs depending on the region where you purchased the camera.
 User can also charge the battery by connecting camera to computer with USB cable.
 Charging time varies according to the ambient temperature and the status of battery.
Status LED Description
Green (blinks slowly) Charging normally
Off Charging finished
Green (blinks quickly) Error
1
2
Downloaded From camera-usermanual.com BenQ Manuals