User manual

18
3. Once the camera detects a smile, it will automatically capture 3 images (by default, the flash
mode setting is set to d).
 If the [Capture Md.] is set to [Single], the camera will only capture an image after it detects
a smile.
 When capturing group shots (if the number of people is more than 1), the camera will
automatically capture the image(s) when it detects two smiles.
Taking a Panoramic Pictures
Pictures are manually shot, and the camera automatically combines pictures in the camera.
1. Set the camera mode to [ ], and press the SET button.
2. Select [Panorama Video] with the c / d / e / f buttons, and press the SET button.
3. Press the shutter button down fully.
4. Horizontally move your camera to select the photographic direction, meanwhile the camera
begins to recording.
5. Press the shutter button again to stop recording when the status bar move to the end. And
the pictures are automatically combined.
 You can press the shutter button anytime to stop recording. And the pictures are
automatically combined.
 Panoramic pictures shooting may not be available in the following situations.
a.When shooting has not finished after a certain period of time.
b.When the camera movement speed is too fast.
c.When the camera is not straight relative to the panorama direction.
Setting the Lomo
Creates a lomo-like effect by adding over saturated colors, dark corners, and so on.
1. Set the camera mode to [ ], and press the SET button.
2. Select [Lomo] with the c / d / e / f buttons, and press the SET button.
3. Press the e button to select the desired option item with the e / f buttons and press the
SET button.
 Lomo 1: Creates a typical Lomo effect.
 Lomo 2: Creates a retro Lomo effect (more sepia tone).
 Lomo 3: Creates a retro Lomo effect (greener tone).
 Lomo 4: Creates a vivid Lomo effect (more purple tone).
 Lomo 5: Creates a vivid Lomo effect (black and white tone).
4. Press the SET button to exit.
Downloaded From camera-usermanual.com BenQ Manuals