User manual

26
 The date that is printed on the image is the date set on the camera. To print the correct date on
the image, set the date on the camera before you capture the image. Refer to the section in this
manual titled “Setting the Date and Time” for further details.
Protecting Images
Set the data to read-only to prevent images from being erased by mistake.
1. Press the 7 button.
 The last image appears on the screen.
2. Select the image that you want to protect with the e / f buttons.
3. Press the MENU button, and select [Playback] icon with the e / f buttons. Press the
SET button.
4. Select [Protect] with the c / d buttons, and press the SET button.
5. Select [Single] or [All] with the e / f buttons, and press SET button.
6. Select [Set] with the e / f buttons, and press the SET button.
 Protection is applied to the image and the camera returns to the playback mode.
 The protect icon [ ] is displayed with protected images.
When [All] has been selected, [ ] is displayed
with all the images.
Canceling the Protection
To cancel protection for only one image, display the image on which you want to remove the
image protection.
1. Press the 7 button.
 The last image appears on the screen.
2. Select the image that you want to cancel protection with the e / f buttons.
3. Press the MENU button, and select [Playback] icon with the e / f buttons. Press the
SET button.
4. Select [Protect] with the c / d buttons, and press the SET button.
5. Select [Single] or [All] with the e / f buttons, and press the SET button.
6. Select [Cancel Protect] with the e / f buttons, and press the SET button.
 The removal of image protection is executed and the camera returns to the playback
mode.
 Formatting an SD/SDHC memory card overrides protection, and erases all images regardless of
their protected status.
Downloaded From camera-usermanual.com BenQ Manuals