User manual

27
Attaching Voice Memos
A maximum of 30 seconds of audio can be recorded as a memo for captured still images. The
voice memo can be recorded only once.
1. Press the 7 button.
 The last image appears on the screen.
2. Select the image to which you want to attach the voice memo with the e / f buttons.
3. Press the MENU button, and select [Playback] icon with the e / f buttons. Press the
SET button.
4. Select [Voice Memo] with the c / d buttons, and press the SET button.
5. Press the SET button.
 [ ] is displayed on the screen and recording starts.
6. To stop recording a voice memo as it is being recorded, press the SET button again.
 An [ ] icon is displayed with images that have been recorded with a voice memo.
 RE-REC mode can only be used for the recorded and selected file, and it can record voice memo
repeatedly to replace the previous recordings.
Playing back voice memo
A press of the SET button displays [ ] and plays back the voice memo.
 Voice memo is only available for still images.
Erasing Images
Erasing a single image / Erasing all images
The quick delete function enables you to delete the last captured image during capture.
1. Press the 7 button.
 The last image appears on the screen.
2. Select the image you want to erase with the e / f buttons.
3. Press the MENU button, and select [Playback] icon with the e / f buttons. Press the
SET button.
4. Select [Delete] with the c / d buttons, and press the SET button.
5. Select [Single] or [All] with the e / f buttons, and press the SET button.
 [Single]: Erases the selected image or the last image.
 [All]: Erases all of the images except for the protected images.
6. Select [Execute] with the e / f buttons, and press the SET button.
 To not erase, select [Cancel], and press the SET button.
7. To exit from the menu, press the MENU button.
Downloaded From camera-usermanual.com BenQ Manuals