Operation Manual

36 Operating the camera
English
ISO
ISO configures the camera sensitivity to light. The higher the ISO value, the
brighter picture you can take in a low-light environment. Yet, you may see more
noise in the picture as you increase the ISO value.
To select an ISO value:
1. Press > > ISO.
2. Press or to enter the submenu.
3. Press or to select an ISO Value.
4. Press to confirm setting.
Metering
To select a metering option:
1. Press > > Metering.
Icon Description
Automatically sets the ISO value.
Equivalent to color ISO 100/200 film. Used for outdoor
photography in bright sunlight.
Equivalent to color ISO 400/800/1600/3200/6400 film. Use it
in a low-light environment or where the flash light is not
allowed.
ISO 6400/3200 for resolution of 3M / 16:9 (2M) / VGA under
only.
Icon Mode Description
Multi Detects the exposure based on multiple
points in the subject area.
Center Detects the exposure of the entire shooting
screen, but gives more importance to the
values near the center.
Spot Detects the exposure based on the center
spot in the subject area.
OK
OK
GH650_GH658 UM - EN.book Page 36 Tuesday, September 25, 2012 5:26 PM