LCD Monitor User Manual GL940M/GL940AM GL941M/GL941AM GL2040M/GL2040AM GL2240M/GL2240AM Welcome
Copyright Copyright © 2010 by BenQ Corporation. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of BenQ Corporation.
Table of Contents Copyright .......................................................................................................................... 2 Disclaimer ......................................................................................................................... 2 Getting started .................................................................................................................. 4 Getting to know your monitor ..............................................................
1. Getting started When unpacking please check you have the following items. If any are missing or damaged, please contact the place of purchase for a replacement. BenQ LCD Monitor Monitor Base Quick Start Guide CD-ROM Power Cord (Picture may differ from product supplied for your region.
Video Cable: DVI-D (Optional accessory for models with DVI inputs, sold separately) Audio Cable Consider keeping the box and packaging in storage for use in the future when you may need to transport the monitor. The fitted foam packing is ideal for protecting the monitor during transport.
2. Getting to know your monitor Front view 1. Speakers 2. Power button 3. Control buttons 3 2 1 1 Back view 4. 5. 6. 7. AC Power Input jack Line In Headphone jack DVI-D socket (Analog-only models do not have the DVI-D input socket) 8. D-Sub socket 9. Lock switch 4 56 7 8 9 • Above diagram may vary depending on the model. • Picture may differ from product supplied for your region.
3. How to assemble your monitor hardware If the computer is turned on you must turn it off before continuing. Do not plug-in or turn-on the power to the monitor until instructed to do so. 1. Attach the monitor base. Please be careful to prevent damage to the monitor. Placing the screen surface on an object like a stapler or a mouse will crack the glass or damage the LCD substrate voiding your warranty.
2. Connect the PC video cable Either Do not use both DVI-D cable and D-Sub cable on the same PC. The only case in which both cables can be used is if they are connected to two different PCs with appropriate video systems. (Not available for analog-only models). To Connect the D-Sub Cable Connect the plug of the D-Sub cable (at the end without the ferrite filter) to the monitor video socket. Connect the other end of the cable (at the end with the ferrite filter) to the computer video socket.
4. Connect the power cable to the monitor. Plug one end of the power cord into the socket labelled ‘POWER IN’ on the rear of the monitor. Do not connect the other end to a power outlet just yet. 5. Connect-to and turn-on the power. Plug the other end of the power cord into a power outlet and turn it on. Picture may differ from product supplied for your region. Turn on the monitor by pressing the power button on the right of the monitor.
How to detach the stand base 1. Prepare the monitor and area. Turn off the monitor and the power before unplugging the power cable. Turn off the computer before unplugging the monitor signal cable. Protect the monitor and screen by clearing a flat open area on your desk and placing a soft item like a towel on the desk for padding, before laying the screen face down on a flat clean padded surface. Please be careful to prevent damage to the monitor.
4. Getting the most from your BenQ monitor To gain the most benefit from your new BenQ color LCD flat screen monitor, you should install the custom BenQ LCD Monitor driver software as provided on the BenQ LCD Monitor CD-ROM. The circumstances under which you connect and install your BenQ LCD Monitor will determine which process you need to follow to successfully install the BenQ LCD Monitor driver software.
How to install the monitor on a new computer This instruction details the procedure for selecting and installing the BenQ LCD Monitor driver software on a new computer which has never had a monitor driver installed before. This instruction is only suitable for a computer which has never been used before, and for which the BenQ LCD Monitor is the first ever monitor to be connected to it.
How to upgrade the monitor on an existing computer This instruction details the procedure for manually updating the existing monitor driver software on your Microsoft Windows computer. It is currently tested as compatible for Windows XP, Windows Vista, and Windows 7 Operating System (OS).
How to install on Windows 7 system 1. Open Display Properties. Go to Start, Control Panel, Hardware and Sound, Devices and Printers and right-click the name of your monitor from the menu. Alternatively, right-click the desktop and select Personalize, Display, Devices and Printers, and right-click the name of your monitor from the menu. 2. Click the Hardware tab. 3. Click Generic PnP Monitor, and then the Properties button. 4. Click the Driver tab and the Update Driver button. 5.
How to install on Windows Vista systems 1. Open Display Settings. Right-click the desktop and select Personalize from the popup menu. Select Display Settings from the Personalize appearance and sounds window. The Display Settings window will display. 2. Click the Advanced Settings button. The Generic PnP Monitor Properties window will display. 3. Click the Monitor tab and the Properties button. 4. Click Continue in the prompted User Account Control window. 5.
How to install on Windows XP system 1. Open Display Properties. The quickest shortcut to Display Properties is through the Windows desktop. Right-click the desktop and select Properties from the popup menu. Alternatively, the Windows menu to Display Properties is located in Control Panel. In Windows XP version, Control Panel is located directly under the main Start menu item. The menu options displayed will depend upon which type of view is selected for your system.
5. Picture optimization The easiest way to obtain an optimal display from an analog (D-Sub) input is to use the AUTO key function. Press the AUTO key to optimize the currently displayed image to the screen. When you connect a digital video output using a digital (DVI) cable to your monitor, the AUTO key and the Auto Adjustment function will be disabled, because the monitor will automatically display the best image.
6. How to adjust your monitor The control panel 1 2 3 4 5 6 1. AUTO: Adjusts vertical position, phase, horizontal position and pixel clock automatically. 2. MENU key: Activates OSD main menu and return to the previous menu or exit OSD. 3. /Volume key: For Up/Increase adjustment. The key is the hot key for Volume. 4. /Mode key: For Down/Decrease adjustment. The key is the hot key for Mode. 5. ENTER key: Enters sub menus and select items.
Hot key mode The monitor keys perform as hot keys to provide direct access to particular functions whenever the menu isn't currently displaying on-screen. Volume hot key Press the key to display the Volume indicators. Further press the increase the volume, while the decrease the volume. key will key will To Mute, press the Volume hot key for 3 seconds. To release Mute, press the Volume hot key for 3 more seconds.
Main menu mode You can use the OSD (On Screen Display) menu to adjust all the settings on your monitor. Press the MENU key to display the following main OSD menu. 1 2 3 There are five main OSD menus: 5 4 1. Display 2. Picture DISPLAY MODE: Standard Auto Adjustment H. Position 10 V. Position 12 Pixel Clock 1 3. Picture Advanced 4. Audio 5.
Display menu 1. Press the MENU key to display the main menu. DISPLAY MODE: Standard H. Position 10 V. Position 12 Pixel Clock 1 keys to select 3. Press the or keys to move the highlight to a menu item and then press the ENTER key to select that item. 12 Move or DISPLAY and then press the ENTER key to enter the menu. Auto Adjustment Phase 2. Press the ENTER Select MENU Exit 4. Press the or keys to make adjustments or selections. 5. To return to the previous menu, press the MENU button.
H. Position V. Position Pixel Clock Phase Adjusts the horizontal position of the screen image. Adjusts the vertical position of the screen image. Adjusts the pixel clock frequency timing to synchronize with the analog input video signal. Not applicable to a digital input signal. See also: Picture optimization on page 17. Adjusts the pixel clock phase timing to synchronize with the analog input video signal. Not applicable to a digital input signal. See also: Picture optimization on page 17.
Picture menu 1. Press the MENU key to display the main menu. PICTURE MODE: Standard Brightness 12 Contrast 10 Sharpness Color ENTER Select keys to select 3. Press the or keys to move the highlight to a menu item and then press the ENTER key to select that item. 2.2 Move or PICTURE and then press the ENTER key to enter the menu. 1 Gamma 2. Press the MENU Back 4. Press the or keys to make adjustments or selections. 5. To return to the previous menu, press the MENU button.
Color - Press ENTER to enter the Color menu This Color menu is available only in the Standard mode. Normal Bluish Reddish User Mode Allows video and still photographs to be viewed with natural coloring. This is the factory default color. Applies a cool tint to the image and is factory pre-set to the PC industry standard white color. Applies a warm tint to the image and is factory pre-set to the news print standard white color. Tailors the image color tint.
Picture Advanced menu 1. Press the MENU key to display the main menu. 2. Press the PICTURE ADVANCED MODE: Standard Picture Mode Standard Senseye Demo OFF Dynamic Contrast Display Mode YUV Move ENTER Select MENU keys to select PICTURE ADVANCED and then press the ENTER key to enter the menu. 3. Press the or keys to move the highlight to a menu item and then press the ENTER key to select that item. 5 Color Format or Exit 4. Press the or keys to make adjustments or selections. 5.
Senseye Demo (available when the Picture Mode is set to Movie, Game, or Photo) Dynamic Contrast (available when the Picture Mode is set to Movie, Game, or Photo) 26 Displays the preview of screen images under the selected mode from Picture Mode. The screen will be divided into two windows; the left window demonstrates images of Standard mode, while the right window presents the images under the specified mode.
Display Mode This feature is provided to allow aspect ratios other than 16:9 or 16:10 (depending on the purchased model) to be displayed without geometric distortion. • Overscan - Slightly enlarges the input image. Use this feature to hide annoying edge noise if present around your image. • Full - Scales the input image to fill the screen. Ideal for 16:9 or 16:10 (depending on the purchased model) aspect images.
Color Format Determines the color space (RGB or YUV) based on the following detected video signal: • D-Sub (VGA) from PC: The default Color Format is RGB. • D-Sub (Component) from a video device: The default Color Format is YUV. You might need to manually set the Color Format if colors shown on the monitor screen do not display properly. • DVI (for models with DVI inputs): Color Format is automatically set to RGB. 28 How to adjust your monitor Press the ENTER key to select this option.
Audio menu 1. Press the MENU key to display the main menu. AUDIO Volume MODE: Standard 10 Mute 2. Press the or keys to select AUDIO and then press the ENTER key to enter the menu. OFF 3. Press the or keys to move the highlight to a menu item and then press the ENTER key to select that item. Move MENU Back 4. Press the or keys to make adjustments or selections. 5. To return to the previous menu, press the MENU button.
System menu 1. Press the MENU key to display the main menu. SYSTEM MODE: Standard Input D-sub 2. Press the or keys to select SYSTEM and then press the ENTER key to enter the menu. OSD Settings DDC/CI Auto Power off 3. Press the or keys to move the highlight to a menu item and then press the ENTER key to select that item. OFF Information Reset All Move MENU Back 4. Press the or keys to make adjustments or selections. 5. To return to the previous menu, press the MENU button.
OSD Settings - Press ENTER to enter the OSD Settings menu. Language Sets the OSD menu language. Press the or keys to change the settings. • English • French • German • Italian • Spanish • Polish The language options displayed on your OSD may differ from those shown on the right, depending on the product supplied in your region. • Japanese • Czech • Traditional Chinese • Hungarian • Simplified Chinese • Serbo-Croatian • Romanian • Dutch • Russian • Swedish H. Position V.
OSD Lock Prevents all the monitor settings from being accidentally changed. When this function is activated, the OSD controls and hotkey operations will be disabled. Press the or keys to change the settings. • YES • NO To unlock the OSD controls when the OSD is preset to be locked, press and hold the "MENU" key for 15 seconds to enter the "OSD Lock" option and make changes.
7. Troubleshooting Frequently asked questions (FAQ) The image is blurred: Read the instructions on the link "Adjusting the Screen Resolution" on the CD, and then select the correct resolution, refresh rate and make adjustments based on these instructions. How do you use a VGA extension cable? Remove the extension cable for the test.
Is the prompt on the display illuminated in orange? If the LED is illuminated in orange, the power management mode is active. Press any button on the computer keyboard or move the mouse. If that does not help, check the signal cable connectors. If any pin is bent or broken off, please contact your dealer to get necessary support. Is the prompt on the display not illuminated at all? Check the power supply mains socket, the external power supply and the mains switch.