Operation Manual

Operation

Optimizing the image

Selecting a picture mode

The projector is preset with several predefined picture

modes so you can choose one to suit your operating

environment and input signal picture type.

To select an operation mode that best suits your need,

you can follow the following steps.

• Make sure the input source is on computer,

composite video, component or HDMI/MHL mode

and the projection screen is being displayed.

• You may press to open the pop-up menu. Press to select Picture Mode

Settings and press OK to enter. Select Picture Mode and press / to select a

desired mode.

The picture modes are listed below.

1. Bright mode: Maximizes the brightness of the projected image. This mode is

suitable for environments where extra-high brightness is required, such as using the

projector in well lit rooms.

2. Presentation mode (Default): Is designed for presentations. The brightness is

emphasized in this mode.

3. Cinema mode: Is appropriate for playing colorful movies, video clips from digital

cameras or DVs through the PC input for best viewing in a blackened (little light)

environment.

4. Game mode: Is appropriate for playing games.

5. User mode: Recalls the settings customized based on the current available picture

modes. See "Setting the User mode" for details.

Setting the User mode

There is an user-definable mode if the current available picture modes are not suitable for

your need. You can use one of the picture modes (except the User) as a starting point and

customize the settings.

1. Press to open the pop-up menu.

2. Press to select Picture Mode Settings and press OK to enter.

3. Select Picture Mode and press / to select User.

4. Press to highlight Reference Mode.

This function is only available when User mode is selected in the Picture Mode sub-menu.

5. Press / to select a picture mode that is closest to your need.

6. Press to select a sub-menu item to be changed and adjust the value with / .

See "Fine-tuning the image quality in User mode" on page 36 for details.

7. When all settings have been done, highlight Save Settings and press OK to store

the settings.

8. The confirmation message “Setting Saved” appears.