Operation Manual

Operation
42
Description of each menu
FUNCTION DESCRIPTION
Wall Color
Corrects the projected picture’s color when the projection surface
is not white. See "Using Wall Color" on page 36 for details.
Aspect Ratio
There are four options to set the image's aspect ratio
depending on your input signal source. See "Selecting the aspect
ratio" on page 34 for details.
Phase
Adjusts the clock phase to reduce picture distortion.
H. Size
Adjusts the horizontal width of the picture.
Color Space
Conversion
Corrects the color space under HDMI mode. See "Changing
color space" on page 28 for details
Auto
Keystone
Auto corrects any keystoning of the image.
Keystone
Corrects any keystoning of the image. See "Correcting
keystone" on page 30 for details.
Picture Mode
Settings
Picture Mode
See "Selecting a picture mode" on page 35 for details.
Reference Mode
See "Setting the User mode" on page 35 for details.
This function is only available when User is selected.
Brightness
See "Adjusting Brightness" on page 36 for details.
Contrast
See "Adjusting Contrast" on page 36 for details.
Color
See "Adjusting Color" on page 36 for details.
Tint
See "Adjusting Tint" on page 36 for details.
This function is only available the system format is NTSC.
Sharpness
See "Adjusting Sharpness" on page 36 for details.
Color Temperature
See "Selecting a Color Temperature" on page 36 for details.
3D Sync Invert
When you discover the inversion of the image depth, enable
this function to correct the problem.
Save Settings
Saves the settings made for User mode.