Operation Manual

Operation
56
Using USB streaming
The projector supports USB streaming for USB display and USB file transfer.
BenQ USB EZ display
The projector can project computer screen via a USB cable instead of a VGA cable.
To u s e U S B d i s p l ay :
1. Connect the projector to a computer using a USB cable.
2. Turn on the power of the projector and your
source device. The projector displays the home
screen.
3. Press / to select USB Streaming.
4. Press / to select USB Display and then
press OK to enter.
5. If your computer can automatically install USB
driver, the projector will project your
computer’s screen.
6. If your computer screen cannot be projected, please go to "My Computer", find the
“BenQ USB EZ Display” (same as using a flash disk drive), and run the “Autorun.exe”
file.
7. Press or to leave computer projection screen and back to projector home
screen.
System requirements
Windows
CPU
Intel/AMD Dual Core 2 GHz or higher
(ATOM not supported)
Graphic card
Intel, nVIDIA or AMD graphic card
with 64MB VRAM or above
OS
Windows XP Professional SP3, Vista
SP3, Windows 7 SP2
DRAM 1 GB DDR