User's Manual

115
Transporting the projector
It is recommended that you ship the projector with its original packing or equivalent.
Extending LED life
The projection LED is an 200AL LED bulb which features a light-source life far beyond traditional bulbs, yet it is still a consumable item. To keep the
lamp life as long as possible, you can change the following settings via the settings menu.
To access the settings menu, see Using the Settings menu on page 85 for details.
Setting LED Mode
Set the projector Light Mode to Eco to extend the lamp life.
1. Select Settings > Picture > Picture Mode > Light Mode.
2. Press ( / ) to move to your desired mode.
3. When done, press to your changes and exit.
LED mode Description
Normal 100% lamp brightness
Eco Mode
This setting reduces system noise and power consumption by 30%. If Eco Mode is selected, the light output
will be reduced and result in darker projected pictures.
Battery Mode
Battery Mode reduces system noise and power consumption to fulfill 3 hours projection*. If Battery mode is
selected, the light output will be reduced and result in darker projected pictures.
*The 3 hours of projection is under the following testing conditions:
• Light Mode: Battery Mode
• Picture Mode: Vivid TV mode
• Audio volume: 50% and playing from GS2
• Bluetooth: On, but not connected to other device
• Wireless Network: On and connected.