User's Manual

37
Starting up the projector
1. Install the provided wireless dongle into the wireless dongle port on the right side of the projector. See Installing the wireless dongle on page 34
for details.
2. Charge the battery or supply power to the projector as indicated in Charging the battery on page 36.
3. Press and hold the power key for 3 seconds. The LED indicator on the projector lights up and “breathes” green after power has been applied.
It will then illuminate according to its charge setting (see LED Indicators on page 19).
• The power button on the remote control is not able to power on the projector. Powering on the projector can only be done using the power key on the top side of the
projector.
• When supplying power directly to the projector please use the supplied power cable to avoid possible dangers such as electric shock and fire.
Press the power button to enter power-saving mode when the projector is on.
I
I
3”