User's Manual

45
Correcting keystone
Keystoning refers to the situation where the projected image is noticeably wider at either the top or bottom. It occurs when the projector is not
perpendicular to the screen.
To a d j u s t t h e Keystone:
1. Press the down arrow key on the remote control three times to navigate to the settings menus.
2. Select Settings and press OK.
3. Select Keystone and press OK.
4. Disable the Auto Keystone setting.
5. Select Keystone adjustment and press OK.
• To correct keystoning at the top of the image, use on your remote control.
• To correct keystoning at the bottom of the image, use on your remote control.
• To return to default keystone settings press on your remote control
6. When you are done adjusting the keystone, press to save your changes and return to the previous menu, or press to save your changes and
go back to the home screen directly.
You may only make these adjustments if Auto Keystone is disabled in the Installation menu. See Keystone on page 98 for details.