User's Manual
Table Of Contents
- Copyright and disclaimer
- Package contents
- Introduction
- Installation
- Operations
- BenQ Launcher
- Connections
- Navigating the Settings menu
- Maintenance
- Troubleshooting
- Specifications
52
Connections
You can connect your device to the projector in various ways to project video content.
Wireless Connection
• Smartphone, tablet, laptop/PC
Wired Connection (HDMI port)
• A/V device.
• Smartphone, tablet, laptop/PC
Wired Connection (USB-A port)
• USB-A flash drive
Wired Connection (USB-C™ port)
• USB-C™ flash drive
• Smartphone, tablet, laptop/PC
Furthermore, you can also connect the projector to Bluetooth speakers/headphones to broadcast audio through the speakers/headphones or connect
a mobile device to the projector via Bluetooth to broadcast audio through the projector’s speakers.
Before connecting a signal source to the projector, be sure to:
• Open the IO cover.
• Install the provided wireless dongle (WDR02U) for wireless connection.
• Place the projector within range of the wireless AP you plan to connect it to.
• Use the correct signal cables for each source.
• Make sure the cables are firmly inserted.
• Devices connected via the USB-C™ port require a USB-C™ cable and must support DisplayPort (version 1.1 or above) functionality in order to project video.
• When the projector is running on battery power (not connected to a power source), it will not charge or provide power to any devices connected to the USB-C™
port. Only when the projector is connected to a power source will it be able to charge or provide power to devices connected to the USB-C™ port.