User's Manual

54
Wireless Connections
Connecting the projector to a wireless network
Before you can project wirelessly via the projector you must first connect the projector to a wireless network. To connect your projector to a wireless
network, or to switch wireless networks:
1. Install the provided wireless dongle into the wireless dongle port (see Installing the wireless dongle on page 34).
2. Power on the projector (see Starting up the projector on page 37).
3. On the home screen of the BenQ Launcher interface, select Wireless Network Settings and press OK to access the wireless settings.
If you have already connected the projector to a wireless network during the setup wizard you may skip the steps in this section.