User's Manual

94
Bed Time
Well-balanced color saturation and contrast, slightly darker than Cinema mode, this mode is designed for
creating a comfortable mood similar to a warn-toned night lamp.
User Recalls the customized settings.
Light Mode
Selects the projector lamp power from the following modes:
Normal Provides full lamp brightness.
Eco Mode
Reduces system noise and power consumption by 30%. If Eco Mode is selected, the light output will be
reduced and result in darker projected pictures.
Battery Mode
Reduces system noise and power consumption to fulfill 3 hours projection*. If Battery Mode is selected,
the light output will be reduced and result in darker projected pictures.
*The 3 hours of projection is under the following testing conditions:
• Light Mode: Battery Mode
• Picture Mode: Vivid TV mode
• Audio volume: 50% and playing from GS2
• Bluetooth: On, but not connected to other device
• Wireless Network: On and connected
Brightness
The higher the value, the greater the brightness. Use this to set the peak while level to suit your selected input and viewing
environment.
Color
Adjusts the color saturation level — the amount of each color in a video picture. Lower settings produce less saturated colors;
setting to the minimum value makes the image black and white.
If the image setting is too high, colors on the image will be overpowering, which makes the image unrealistic.
Color settings can only be adjusted when HDMI, USB flash drive, or DisplayPort is selected as the source.
Sharpness
Adjusts the sharpness of the image — the distinctness of the boundaries between different tones or colors. The higher the value
the sharper the image, while the lower the value the less sharp the image is.
Item Options and descriptions