User's Manual

35
Starting up the projector
1. Charge the battery or supply power to the projector by plugging the supplied power adapter into the projector and a power outlet.
2. Press and hold the power key for 3 seconds. The power LED indicator on the projector lights up and “breathes” blue after power has been
applied. It will then illuminate according to its charge setting (see LED Indicators on page 19).
3. Connect any video equipment supporting DisplayPort (version 1.1 or above) or a USB-C™ storage device to the USB-C™ port on the rear of
the projector. If you want to project video via a wireless connection or if you want to access the BenQ Launcher, you do not need to connect
any video equipment.
4. The fans starts operating, and a start-up image will be shown while the projector warms up, this process may take a few minutes. The projector
does not respond to further commands while it is warming up.
5. If this is the first time you turn on the projector, the setup wizard appears to guide you through setting up the projector. If you have already done
this, skip this step.
• Use the arrow keys (///) on your remote control to move through the menu items.
• The power button on the remote control is not able to power on the projector, powering on the projector can only be done using the power key on the top side of the
projector.
• When supplying power directly to the projector please use the supplied power cable to avoid possible dangers such as electric shock and fire.
For more details on connection options, see Connections on page 48.
I
I
3”